What's New
2024 pièces

Aluminium footrest, remanufactured, very robust. Simple yet understated look. Super easy to install. A great replacement for plastic, especially if you like...

Good quality straight cut segment. We also have the oblique cut one. Sold individually, remember that you need 3 for one piston...

Good quality springs. Replace them in pairs for good, even engine suspension. Don't forget to also replace the silent blocks.

This hose is of average quality because the alloy used is rigid, and therefore brittle. The nuts are 10mm (as on recent...

This hose is of average quality because the alloy used is rigid, and therefore brittle. The nuts are 10mm (as on the...

This running board is a reproduction that is quite far from the original. It does not replicate the granulated appearance of the...

Don't forget the shoulder bolts that will replace the rivets when you change your kickstand!

Optics for 3800, 3300

Is your friction-drive moped engine vibrating? Don't hesitate to change the silent blocks and change them in pairs, otherwise you won't improve...

Sagging or loose spring? Don't skimp on replacing it ;) Warning: this spring has a "head-to-tail" hook, generally made for 3800 and...

Can be fitted to older models.

Can be fitted to older models.

14v 7w bulb for moped tail light. This bulb is 14V, which helps to limit bulbs "burning out" too often because at...

Adaptable bulb holder for all models

Quality bare spark plug wire for mopeds. 40 cm for optimal placement. Beru or Boucord depending on availability Workshop Tip: Use good...

Workshop tip: When restoring your engine, don't forget to change these washers. They are found around the crankshaft casing, around the timing...

Sold in pairs because there are 2 balls in one pump!! Workshop tip: It is said that it is quite easy to...

Essential for renovating your fuel pump. Sold in packs of 2... because there are 2 seats in a pump!! Workshop tip: It's...

In any case, it is better to keep the original seat, which is much more suitable than this remanufactured part. But when...

Fuel supply problem, bubbles in the return line? :) It's probably a fuel supply problem... a pump refurbishment or, more simply, a...

CAF 1 red gasket sealant. An engine should not be "slathered" with gasket sealant! However, over time, joint surfaces can degrade (oxidation,...

This 6203 bearing is SKF quality. It is a quality component for the refurbishment of your engine. Essential in terms of quality...

Well made, this seal perfectly fulfills its dust cover mission, just like the original one. Workshop tip: Apply a bead of bearing...

This roller is an excellent quality part that can be installed without any problem to replace a broken or worn roller. Unlike...